|
Erases
6 Hard Drives at one time
9 DLT's/SDLT's
The HDTD-8750 is a large
capacity Hard Drive and Tape Degausser capable of erasing Laptop
Computers and hot swappable hard drives with mounting hardware
attached.
In addition, the HDTD-8750's large capacity allows the
erasure of up to 6 hard drives, 9 DLT's (SDLT, SDLT-600,
LTO's), or several large tape reels at one time. |
 |
The HDTD-8750 is designed to permanently eliminate data contained on
Hard Drives, Laptop Computers, Tape
Cartridges and Tape Reels.
The HDTD-8750 erases all
media formats and sizes. The large opening of the HDTD-8750 allows it to
erase up to six (6) hard drives or nine (9) DLT, SDLT or SDLT II media
at one time. The HDTD-8750 will erase any format of magnetic media up to
2˝" high, 14" in length and 12˝" in width, including laptop computers.
Simple operation allows
non-technical operators to erase all formats of media without the
confusion of using complicated adapters.
Operation is easy. Place
media in the pull out tray, slide the tray back in, push the erase
button and the HDTD-8750 will do the rest. When the operation is
complete (approximately 2 minutes), you may safely reuse the media or
dispose of it.
The HDTD-8750
conveniently operates on standard wall voltages and can be easily moved
as it comes standard with casters.
Features:
-
Completely erases
all formats of tape, hard drives and laptops.
-
Large capacity
allows for up to 6 hard drives at one time.
-
Erases network
drives with hot swappable hardware attached.
-
Quick & Quiet
operation.
|
ATTENTION WHEN DEGAUSSING:
Please note the following suggestions when using
a Degausser:
Watches:
Remove your wristwatch when using the Degausser.
Direct exposure to the magnetic field may damage some watches.
Magnetic
Strip Cards:
Do not place your wallet or purse containing
credit or phone cards directly on or above the conveyor belt. Magnetic
strip cards are very easy to erase. However, having a wallet in
your back pants pocket while using the Degausser will not erase
the cards.
Tape storage:
Store videotapes you do not intend to
erase approximately four feet from the Degausser. This will eliminate
the opportunity for the operator to accidentally run “good” tapes
through the Degausser.
Placement
of Tapes:
When erasing tapes, place them on the left edge
of the belt (as you face the machine). In order they may travel
the full length of the conveyor belt for quality erasure.
Pacemakers:
Do not operate the Degausser if you have a pacemaker.
Please call us for more information or a quote
(800) 468-6888,
email us at periphman@periphman.com
,
or fax us at (303) 371-8643.
You can also fill in the Information Request Form here
.
